Tweet
Despite China's might, US factories maintain edge
Leaner and faster: US factories boost productivity and maintain edge despite China's rise
WASHINGTON (AP) -- U.S. factories are closing. American manufacturing jobs are reappearing overseas. China's industrial might is growing each year.
And it might seem as if the United States doesn't make world-class goods as well as some other nations.
"There's no reason Europe or China should have the fastest trains, or the new factories that manufacture clean energy products," President Barack Obama said in his State of the Union policy address last week.
Yet America remains by far the No. 1 manufacturing country. It out-produces No. 2 China by more than 40 percent. U.S. manufacturers cranked out nearly $1.7 trillion in goods in 2009, according to the United Nations.
The story of American factories essentially boils down to this: They've managed to make more goods with fewer workers.
The United States has lost nearly 8 million factory jobs since manufacturing employment peaked at 19.6 million in mid-1979. U.S. manufacturers have placed near the top of world rankings in productivity gains over the past three decades.
That higher productivity has meant a leaner manufacturing force that's capitalized on efficiency.
"You can add more capability, but it doesn't mean you necessarily have to hire hundreds of people," says James Vitak, a spokesman for specialty chemical maker Ashland Inc.
The industry's fortunes are brightening enough that U.S. factories are finally adding jobs after years of shrinking their payrolls. Not a lot. But even a slight increase shows manufacturers are growing more confident. They added 136,000 workers last year -- the first net increase since 1997.
What's changed is that U.S. manufacturers have abandoned products with thin profit margins, like consumer electronics, toys and shoes. They've ceded that sector to China, Indonesia and other emerging nations with low labor costs.
Instead, American factories have seized upon complex and expensive goods requiring specialized labor: industrial lathes, computer chips, fighter jets, health care products.
Consider Greatbatch Inc., which makes orthopedics and other medical goods. The company is expanding its manufacturing operations near Fort Wayne, Indiana. Greatbatch wanted to take advantage of a specialized work force in northeastern Indiana, a hub of medical research and manufacturing.
"When you're talking about medical devices, failure is not an option," CEO Thomas Hook says. "It's a zero-mistake environment. These products are customized and high-tech. They go into patients to keep them alive."
Hook says the United States offers advantages over poorer, low-wage countries: reliable supplies of electricity and water, decent roads. And some localities support businesses by providing infrastructure and vocational training for potential hires.
Centerline Machining & Grinding in Hobart, Wisconsin, which makes custom parts for manufacturers in the paper industry, plans to add to its staff of 26. But it's struggling to find the skilled tradesmen it needs for jobs paying $18 to $25 an hour.
CEO Sara Dietzen laments that local vocational schools cut back training courses in recent years, having concluded that the future for manufacturing was dim. Not from her view it isn't. For her company, output is all about speed.
"Our average customer wants a turnaround in less than three weeks," Dietzen says. "You're not going to get that in China."
Still, economist Cliff Waldman of the industry research group Manufacturers Alliance/MAPI doubts that U.S. factories will continue to expand their payrolls in the long run. Manufacturing, he says, is "not a job creator for the U.S., basically."
Global competition will always force factory managers to try to replace expensive workers with machines or with low-wage labor overseas, Waldman says.
Mark Perry, a visiting scholar at the conservative American Enterprise Institute, likens the loss of manufacturing jobs to the exodus of workers from farms between the 19th and 20th centuries. If that migration hadn't happened, Perry says, "we'd still have millions of people working in agriculture. Now, we can employ fewer people in factories."
But the transition can be painful, he concedes.
The U.S. remains No. 1 in global manufacturing, accounting for 18 percent of global manufacturing output in 2008. But China is catching up. Its share of manufacturing output jumped from about 6 percent in 1998 to 15 percent in 2008.
Critics have a ready explanation for that: unfair competition.
Robert Scott of the left-leaning Economic Policy Institute says China is cheating in world markets -- keeping its currency artificially low to make Chinese products less expensive overseas and unfairly subsidizing its exporters.
Scott and other critics want to see the Obama administration support U.S. manufacturers by pressuring Beijing to drop the subsidies and let its currency rise freely. A higher-valued Chinese currency would make U.S. exports cheaper for Chinese consumers.
Centerline CEO Dietzen says she isn't fazed by Chinese manufacturing. Some of her customers have placed orders with Chinese companies, she says, only to return, frustrated, to her company.
Chinese factories want mainly big orders. And they demand lots of time to fill them.
Dietzen says her clients are "finding when they get their parts back from China, they're not always what they want. So we end up doing the work anyway."
"A common misperception," Greatbatch CEO Hook says, is that the United States doesn't make anything anymore.
The reality is rather different.
"We need a highly skilled work force," Hook says. "So it's very advantageous to be in a country like the United States where people are educated and ready to be hired"
Leaner and faster: US factories boost productivity and maintain edge despite China's rise
WASHINGTON (AP) -- U.S. factories are closing. American manufacturing jobs are reappearing overseas. China's industrial might is growing each year.
And it might seem as if the United States doesn't make world-class goods as well as some other nations.
"There's no reason Europe or China should have the fastest trains, or the new factories that manufacture clean energy products," President Barack Obama said in his State of the Union policy address last week.
Yet America remains by far the No. 1 manufacturing country. It out-produces No. 2 China by more than 40 percent. U.S. manufacturers cranked out nearly $1.7 trillion in goods in 2009, according to the United Nations.
The story of American factories essentially boils down to this: They've managed to make more goods with fewer workers.
The United States has lost nearly 8 million factory jobs since manufacturing employment peaked at 19.6 million in mid-1979. U.S. manufacturers have placed near the top of world rankings in productivity gains over the past three decades.
That higher productivity has meant a leaner manufacturing force that's capitalized on efficiency.
"You can add more capability, but it doesn't mean you necessarily have to hire hundreds of people," says James Vitak, a spokesman for specialty chemical maker Ashland Inc.
The industry's fortunes are brightening enough that U.S. factories are finally adding jobs after years of shrinking their payrolls. Not a lot. But even a slight increase shows manufacturers are growing more confident. They added 136,000 workers last year -- the first net increase since 1997.
What's changed is that U.S. manufacturers have abandoned products with thin profit margins, like consumer electronics, toys and shoes. They've ceded that sector to China, Indonesia and other emerging nations with low labor costs.
Instead, American factories have seized upon complex and expensive goods requiring specialized labor: industrial lathes, computer chips, fighter jets, health care products.
Consider Greatbatch Inc., which makes orthopedics and other medical goods. The company is expanding its manufacturing operations near Fort Wayne, Indiana. Greatbatch wanted to take advantage of a specialized work force in northeastern Indiana, a hub of medical research and manufacturing.
"When you're talking about medical devices, failure is not an option," CEO Thomas Hook says. "It's a zero-mistake environment. These products are customized and high-tech. They go into patients to keep them alive."
Hook says the United States offers advantages over poorer, low-wage countries: reliable supplies of electricity and water, decent roads. And some localities support businesses by providing infrastructure and vocational training for potential hires.
Centerline Machining & Grinding in Hobart, Wisconsin, which makes custom parts for manufacturers in the paper industry, plans to add to its staff of 26. But it's struggling to find the skilled tradesmen it needs for jobs paying $18 to $25 an hour.
CEO Sara Dietzen laments that local vocational schools cut back training courses in recent years, having concluded that the future for manufacturing was dim. Not from her view it isn't. For her company, output is all about speed.
"Our average customer wants a turnaround in less than three weeks," Dietzen says. "You're not going to get that in China."
Still, economist Cliff Waldman of the industry research group Manufacturers Alliance/MAPI doubts that U.S. factories will continue to expand their payrolls in the long run. Manufacturing, he says, is "not a job creator for the U.S., basically."
Global competition will always force factory managers to try to replace expensive workers with machines or with low-wage labor overseas, Waldman says.
Mark Perry, a visiting scholar at the conservative American Enterprise Institute, likens the loss of manufacturing jobs to the exodus of workers from farms between the 19th and 20th centuries. If that migration hadn't happened, Perry says, "we'd still have millions of people working in agriculture. Now, we can employ fewer people in factories."
But the transition can be painful, he concedes.
The U.S. remains No. 1 in global manufacturing, accounting for 18 percent of global manufacturing output in 2008. But China is catching up. Its share of manufacturing output jumped from about 6 percent in 1998 to 15 percent in 2008.
Critics have a ready explanation for that: unfair competition.
Robert Scott of the left-leaning Economic Policy Institute says China is cheating in world markets -- keeping its currency artificially low to make Chinese products less expensive overseas and unfairly subsidizing its exporters.
Scott and other critics want to see the Obama administration support U.S. manufacturers by pressuring Beijing to drop the subsidies and let its currency rise freely. A higher-valued Chinese currency would make U.S. exports cheaper for Chinese consumers.
Centerline CEO Dietzen says she isn't fazed by Chinese manufacturing. Some of her customers have placed orders with Chinese companies, she says, only to return, frustrated, to her company.
Chinese factories want mainly big orders. And they demand lots of time to fill them.
Dietzen says her clients are "finding when they get their parts back from China, they're not always what they want. So we end up doing the work anyway."
"A common misperception," Greatbatch CEO Hook says, is that the United States doesn't make anything anymore.
The reality is rather different.
"We need a highly skilled work force," Hook says. "So it's very advantageous to be in a country like the United States where people are educated and ready to be hired"
Comment